- Heavy-duty 1/4-inch steel crossmembers maximize ground clearance, improve strength and offroad capability
- Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility
- Top mounted strut spacers to provide lift and install easily
- Differential skid plate for improved offroad protection
- High-strength fabricated lift blocks and u-bolts ensure rear suspension durability and proper stance with tail high appearance
- NX2 Nitro shocks deliver superior dampening for on- and off-road performance
- Accommodates up to 35” tires for a bold, aggressive stance
- NX2 Nitro Series shocks:
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
In the box:
- (2) NX2 shock rear
- Front BDS cross member
- (2) Sway bar drop
- Differential skid plate
- (2) Brake line bracket
- Rear BDS cross member
- (2) Differential drop bracket
- (2) Differential support bracket
- (2) Knuckle
- (2) 4″ strut spacer
- (2) Strut preload spacer
- (2) Rear block
- (2) Bump stop extension
- (4) U-Bolt
- Brake line relocation bracket
- Hardware
Notes:
- 18″ or larger diameter wheels are required. Stock 17″ and 18″ wheels cannot be re-installed. Stock 20″ wheels can be used with up to a 305/60R20 tire
- 18″ wheels with 5-5,5″ backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5,5″ backspacing is highly recommended for tire-to-frame crash bar clearance
- Models with 2-piece rear driveshaft will require carrier bearing shim kit BDS122406 (sold separately)
- Block kits replace factory 1-1/4″ block. The stock block will not be reinstalled
- Crash bars may require modification based on wheel and tire choice. It is the end user’s responsibility to ensure modifications are non-detrimental to vehicle safety
- Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift
- Will not work with models with CCD (Continuous Controlled Damping)
- Requires frame bracket modification
- Will not work with Diesel models
- Will not fit Tremor and Raptor models
- Fits 4WD models only
- Max wheels size:
- 35 x 12.5 with 20 x 8 and 5.5 in. Backspace Trimming may be required
- 35 x 12.5 with 20 x 9 and 5.75 in. Backspace Trimming may be required
